SAN DIEGO, CA / ACCESS Newswire / September 16, 2025 / Cubic Defense, a recognized industry leader in delivering air combat training, secure communications, edge compute and networking solutions, will showcase its portfolio of innovative technologies during the Air, Space & Cyber Conference, September 22-24, 2025, at the Gaylord National Resort & Convention Center in National Harbor, Maryland.
“Cubic’s innovative solutions empower the warfighter with a definitive advantage across ground, air, cyber and space domains,” said Russ Marsh, President, Cubic Defense. The battle-tested technologies demonstrated during the event enhance readiness and support mission success for our defense partners and allies, helping them stay ahead of emerging threats.”
Visit the Cubic at booth 1917 and speak with experts who will demonstrate:
Simplified, Planning Execution Analysis and Reconstruction (SPEAR) – Accelerating the Multi-domain OODA Loop: A common data model and DoD-approved tech stack that reduces cognitive burden through optimized displays and analytics of kinetic and non-kinetic data, in multi-domain operations and LVC environments.
Synthetic Inject to Live-Live Virtual Constructive (SITL-LVC): Delivers a training environment in which the combat and sensor display effectively block, pass along or guise various inputs to aircraft systems that looks, feels and sounds identical to what aircrew would encounter in live combat.
Mobile Advanced Tactical Training Encrypted Range System (MATTERS): Offers secure, rapidly deployable Joint and Coalition training with live instrumentation, simulators, scenario generation and data capture for mission reconstruction.
Integrating Golden Dome – Optimizing Multi-domain Integrated Air and Missile Defense through reconstruction and data analytics: SPEAR’s common data model enhances Integrated Air and Missile Defense (IAMD) by reconstructing data from multi-service battle management and weapons systems.
Decisive Advantage through Instrumentation to incrementally achieve the Advanced Training Environment (ATE):
P5 System Security Update (SSU): Adds cost-effective encryption to P5 ACMI pods, enabling secure 4th and 5th gen aircraft training using existing hardware and wave forms.
P5 Block 7 Update: Transmits classified sensor and weapons data for enhanced Live, Virtual, Constructive (LVC) training with accurate effects modeling.
SLATE Pod: Delivers SITL-LVC capability to 4th gen and rotary wing U.S. DoD platforms, replicating peer adversary complexity and scale.
DTECH Mission Solutions: Post-Quantum Secure Tactical Communications from Edge to Core: Zero-trust, post-quantum encrypted communications pipeline operates at the tactical edge in Denied, Disrupted, Intermittent, and Limited (DDIL) environments, ensuring resilient U.S. Air Force mission communications.
Secure Communications: Protected Waveforms – Multi-link SATCOM, Software Defined Radios and CSAR Radios: Deliver adaptive and resilient spectrum dominance with Multi-link, Multi-band, Multi-constellation SATCOM, Software Defined Radios (SDR) and stealthy waveforms that resolve critical gaps in tactical and operational communications, enabling the U.S. Air Force to update communications at the speed of the threat.
To learn more about Cubic products and services, visit www.cubic.com.
About Cubic Cubic creates and delivers technology solutions in transportation that make people’s lives easier by simplifying their daily journeys, and defense capabilities that help promote mission success and safety for those who serve their nation. Led by our talented teams around the world, Cubic is driven to solve global challenges through innovation and service to our customers and partners.
Part of Cubic’s portfolio of businesses, Cubic Defense provides networked Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) solutions and is a leading provider of live, virtual, constructive and game-based training solutions for both U.S. and Allied Forces. These mission-inspired capabilities enable assured multi-domain access; converged digital intelligence; and superior readiness for defense, intelligence, security and commercial missions. For more information, visit www.cubic.com.
Recognition highlights WEI’s private cloud leadership and validated expertise in VMware Cloud Foundation
SALEM, NH / ACCESS Newswire / September 16, 2025 / WEI, an award-winning IT solutions provider, is proud to announce it has earned Pinnacle Partner status within the Broadcom Advantage Partner Program as a reseller for VMware solutions. Pinnacle is the program’s highest tier, only awarded to partners that demonstrate exceptional technical proficiency, lifecycle delivery strength, and proven impact on enterprise hybrid cloud transformation.
This elite designation reflects WEI’s ability to deliver measurable outcomes through advanced VMware capabilities. As a VMware Certified Design Expert (VCDX) and member of Broadcom’s Software Knights program, WEI brings recognized leadership in VMware vSphere, vSAN, and Kubernetes infrastructure. Via the Expert Advantage program, WEI enables enterprise transformation through architecture design, system integration, and compliance-ready modernization strategies.
“Earning Pinnacle Partner status reflects WEI’s long‑standing focus on guiding enterprises through complex infrastructure modernization,” said Belisario Rosas, President of WEI. “This recognition validates our ability to help customers simplify cloud adoption and achieve lasting value from their VMware investments.”
With Broadcom’s VMware private cloud platform approach, many enterprises now have access to advanced capabilities like VMware Cloud Foundation (VCF) Operations, VCF Automation, NSX, and Kubernetes services. WEI bridges the gap between entitlement and enablement through a structured, assessment-led methodology that identifies underutilized assets, reduces MTTR, and accelerates private cloud maturity.
“Organizations must scale workloads fast, integrate across platforms, and control cloud costs,” said Fred McHugh, Director of Infrastructure, Cloud, and Automation Services at WEI. “Our VCF deployments deliver high availability, strong performance, and interoperability, supporting faster rollouts and dynamic transformation.”
As a Broadcom Pinnacle Partner, WEI is not just delivering VMware technology, it is activating enterprise readiness. From security and compliance to automation and AI-driven optimization, WEI is helping IT leaders drive business outcomes across industries.
MILTON, ON / ACCESS Newswire / September 16, 2025 / Pro-1 Truck Repair & Tires, a trusted service provider specializing in comprehensive truck and trailer repair, has been named the 2025 Consumer Choice Award recipient in the Truck Service and Repair category for Halton. Recognized for its commitment to quality workmanship, competitive pricing, and reliable roadside support, Pro-1 has quickly become a go-to destination for drivers and fleets across the region.
Since opening in 2019, Pro-1 Truck Repair & Tires has built its reputation on providing efficient, expert repair services for all types of trucks and RVs. The shop specializes in car haulers, flatbeds with low decks, and goosenecks, while also servicing highway trucks, vans, and reefer trailers. Conveniently located off Exit 320 on Highway 401 in Acton/Milton, the shop offers easy access for local and passing drivers in need of quick, dependable service.
“At Pro-1, we know the importance of keeping trucks on the road,” says the Pro-1 Truck Repair team. “Downtime costs drivers and businesses valuable time and money, and our mission is to deliver expert repairs and fast solutions so our clients can get back to work with confidence.”
Expertise That Drivers Trust
Pro-1’s success lies in its focus on delivering more than just mechanical fixes-it’s about providing peace of mind. The skilled team works across a wide range of vehicles and equipment, from heavy-duty highway rigs to specialized trailers. Whether it’s routine maintenance, urgent repair, or roadside assistance, Pro-1 has earned the trust of drivers who depend on reliable service and honest pricing.
The company’s roadside service further sets it apart, ensuring drivers can access expert support when and where they need it most. This level of commitment has made Pro-1 a vital partner for both independent operators and commercial fleets.
“We take pride in offering not only excellent repair services but also fair and competitive pricing,” adds the Pro-1 team. “Our goal is to keep every customer satisfied and every truck running smoothly.”
Recognition Backed by Research
The Consumer Choice Award is the only award in North America that recognizes business excellence based on independent market research. There are no panels or public votes-winners are chosen strictly through unbiased studies of consumer perceptions and brand reputation.
For Pro-1 Truck Repair & Tires, this recognition is a reflection of its unwavering dedication to service, reliability, and customer trust. In just a few short years, the business has established itself as a leader in the Halton region’s truck service industry.
Looking Ahead
As the demand for reliable truck repair services grows, Pro-1 Truck Repair & Tires remains focused on expanding its capabilities while staying true to its roots: expert repair, responsive service, and a customer-first approach. With roadside assistance and a central location serving the busy 401 corridor, the company is well positioned to continue meeting the evolving needs of the trucking community.
To learn more about Pro-1 Truck Repair & Tires or to book service, Click Here.
About Pro-1 Truck Repair & Tires Founded in 2019, Pro-1 Truck Repair & Tires is a leading truck service provider located off Exit 320 on Highway 401 in Acton/Milton. Specializing in car haulers, flatbeds, goosenecks, highway trucks, vans, and reefer trailers, the company offers comprehensive repair solutions and reliable roadside services at competitive prices.
About Consumer Choice Award Since 1987, Consumer Choice Award has been recognizing and promoting business excellence across North America. Through a rigorous selection process, only the most outstanding businesses in each category earn this prestigious recognition. Learn more at www.ccaward.com.
iAccess Alpha’s Virtual Best Ideas Fall Investment Conference September 16-17, 2025
RALEIGH, NC / ACCESS Newswire / September 16, 2025 / iAccess Alpha’s Virtual Best Ideas Fall Investment Conference will take place on September 16-17, 2025, bringing together top micro-cap companies and investors for two days of high-quality insights and investing opportunities.
The event begins on Tuesday, September 16, 2025, with a series of live-streamed company presentations, beginning at 9:00 AM ET. The following day, Wednesday, September 17, will be dedicated to 1×1 meetings between presenting companies and pre-approved investors, starting at 8:00 AM ET.
How to Attend: Investors and industry professionals can register to watch the presentations and request 1×1 meetings by visiting the official event website: Register Here
Conference Schedule – September 16, 2025 (All Times ET):
About iAccess Alpha’s Virtual Best Ideas Investment Conferences iAccess Alpha hosts four virtual investment conferences annually (March, June, September, and December), showcasing high-potential small and micro-cap investment opportunities. The conferences feature live company presentations on Day 1, followed by exclusive 1×1 investor meetings on Day 2. Since 2019, iAccess Alpha has co-organized leading microcap-focused events, connecting top-tier investors with high-potential companies.
Sports Brand Supports Germany’s High-Goal Polo Event for Sixth Consecutive Year
BERLIN, GERMANY AND WEST PALM BEACH, FL / ACCESS Newswire / September 16, 2025 / U.S. Polo Assn., the official sports brand of the United States Polo Association (USPA), proudly partnered as the Official Jersey and Apparel Sponsor of the Engel & Völkers Berlin Maifeld Polo Cup, also known as the German High-Goal Championship 2025, held August 22-31, 2025, in Berlin. This prestigious tournament is the pinnacle of the polo season in Germany and is one of the most celebrated events in European polo.
The finals weekend for the Engel & Völkers Berlin Maifeld Polo Cup took place at the iconic Maifeld Stadium, the same historic venue where the sport of polo was last played in the 1936 Olympic Games. Qualifying matches were held August 21-28 at the Prussian Polo and Country Club, leading to a thrilling finale that showcased the very best of the sport. In a dramatic final, Team Plusquadrat pulled away from Team Netjets with a score of 7 – 6.5. The tournament MVP was Bartolomé Bayugar from Team Plusquadrat, who was the top scorer in the final with three goals.
“Serving as the Official Jersey and Apparel Sponsor for the Engel & Völkers Berlin Maifeld Polo Cup is an extraordinary honor for U.S. Polo Assn. to support an event that celebrates both the rich tradition and bright future of the sport of polo,” said J. Michael Prince, President and CEO of USPA Global, the company that manages the multi-billion-dollar U.S. Polo Assn. brand. “To support such an historic tournament in the heart of Berlin, on the same field where the sport made Olympic history in 1936, is a true reflection of our global brand’s authentic connection to the sport.”
As the event’s Official Jersey and Apparel Sponsor, U.S. Polo Assn. outfitted players and officials with branded performance team jerseys, umpire jerseys, caps, and hoodies. This year marked U.S. Polo Assn.’s sixth consecutive year supporting the Engel & Völkers Berlin Maifeld Polo Cup.
The brand’s presence aligns with its broader European expansion, including retail growth in Germany and recent high-impact activations in markets such as the U.K., Italy, Spain, and beyond. Earlier this summer, U.S. Polo Assn. celebrated the grand opening of its first retail store in Berlin, located at the iconic Alexa Mall. This retail debut marks the beginning of a multi-year growth strategy across Germany and surrounding regions with strategic brand partners Incom S.p.a. and Modevertrieb Sarnacchiaro GmbH (MVS), further solidifying U.S. Polo Assn.’s presence globally.
“We are excited to continue building our partnership with U.S. Polo Assn. as we elevate the Engel & Völkers Berlin Maifeld Polo Cup year after year,” said Mortiz Gaedeke, Co-CEO of Sevendays Polo Event GmbH, the Engel & Völkers Berlin Maifeld Polo Cup event organizer. “With U.S. Polo Assn.’s growing presence in Germany, including their new Berlin retail store, this collaboration strengthens the link between the sport of polo and their authentic connection with sports fans and consumers.”
Photo Credit: Guadalupe Aizaga
About U.S. Polo Assn. and USPA Global
U.S. Polo Assn. is the official sports brand of the United States Polo Association (USPA), the largest association of polo clubs and polo players in the United States, founded in 1890 and based at the USPA National Polo Center (NPC) in Wellington, Florida. This year, U.S. Polo Assn. celebrates 135 years of sports inspiration alongside the USPA. With a multi-billion-dollar global footprint and worldwide distribution through more than 1,100 U.S. Polo Assn. retail stores as well as thousands of additional points of distribution, U.S. Polo Assn. offers apparel, accessories, and footwear for men, women, and children in more than 190 countries worldwide. The brand sponsors major polo events around the world, including the U.S. Open Polo Championship®, held annually at NPC in The Palm Beaches, the premier polo tournament in the United States. Historic deals with ESPN in the United States, TNT and Eurosport in Europe, and Star Sports in India now broadcast several of the premier polo championships in the world, sponsored by U.S. Polo Assn., making the thrilling sport accessible to millions of sports fans globally for the very first time.
U.S. Polo Assn. has consistently been named one of the top global sports licensors in the world alongside the NFL, PGA Tour, and Formula 1, according to License Global. In addition, the sport-inspired brand is being recognized internationally with awards for global growth. Due to its tremendous success as a global brand, U.S. Polo Assn. has been featured in Forbes, Fortune, Modern Retail, and GQ as well as on Yahoo Finance and Bloomberg, among many other noteworthy media sources around the world.
USPA Global is a subsidiary of the United States Polo Association (USPA) and manages the multi-billion-dollar sports brand, U.S. Polo Assn. USPA Global also manages the subsidiary, Global Polo, which is the worldwide leader in polo sport content. To learn more, visit globalpolo.com or Global Polo on YouTube.
###
Contact Information
Shannon Stilson VP, Sports Marketing and Media sstilson@uspagl.com +001.561.227.6994
Stacey Kovalsky VP, Global PR and Communications skovalsky@uspagl.com +001.561.790.8036
SASKATOON, SK / ACCESS Newswire / September 16, 2025 / Infinity Events & Decor has been recognized with the 2025 Consumer Choice Award in the Event Planner category for Saskatoon. This recognition highlights the company’s reputation as a trusted partner for weddings, galas, fundraisers, and corporate functions across Saskatchewan.
Infinity Events & Decor is known as a one-stop shop for weddings and events in Saskatoon, Warman, Martensville, and beyond. With a wide range of services that include full wedding and event planning, event coordination, décor rentals, photography, videography, and live florals, the company provides everything clients need to bring their vision to life.
“Our mission has always been to make events seamless, beautiful, and memorable,” says the Infinity Events & Decor team. “Receiving the Consumer Choice Award is an incredible honour because it shows that our community recognizes the passion and care we put into every detail.”
From Weddings to Corporate Events
Whether helping couples plan the wedding of their dreams or supporting non-profits with gala fundraisers, Infinity Events & Decor has earned a reputation for professionalism, creativity, and dependability. The team works closely with clients every step of the way, ensuring each event reflects their unique style and goals.
By offering both planning services and décor rentals under one business, Infinity simplifies the process, reducing stress for clients while delivering flawless results.
Celebrated By the Community
The Consumer Choice Award reflects the confidence of local residents and businesses who continue to choose Infinity Events & Decor as their top event partner. For the team, this recognition is more than an accolade – it is a celebration of the relationships they have built and the milestones they have helped create throughout Saskatchewan.
Shaping The Future of Events in Saskatchewan
As Infinity Events & Decor celebrates its 2025 Consumer Choice Award, the company remains committed to elevating events throughout the province. By blending creativity, attention to detail, and comprehensive services, Infinity continues to set the standard for event planning in the region.
Infinity Events & Decor is a Saskatoon-based event planning company serving clients across Saskatchewan. Offering full wedding and event planning, event coordination, décor rentals, photography, videography, and live floral design, Infinity provides comprehensive solutions for weddings, fundraisers, galas, and corporate functions. With a reputation for creativity and professionalism, Infinity is dedicated to making every event seamless and unforgettable. Learn more at www.infinityeventsanddecor.com.
About Consumer Choice Award
Since 1987, Consumer Choice Award has been recognizing and promoting business excellence across North America. Through a rigorous selection process, only the most outstanding businesses in each category earn this prestigious recognition. Learn more at www.ccaward.com.
TORONTO, ON / ACCESS Newswire / September 16, 2025 / Highlander Silver Corp. (TSX:HSLV)(“Highlander Silver” or the “Company“) is pleased to report assay results from the second series of holes designed to test the expanding Bonita vein system, which include some of the highest gold grades encountered to date. The Bonita vein system is exposed along a ridgeline approximately 10km to the south of the bonanza grade Ayelen underground deposit at the San Luis gold-silver project in Central Peru.
Highlights are listed below, with corresponding images in Figures 1-2 and detailed results in Tables 1-2.
Highlights
The results of step-out drilling include some of the highest gold grades encountered to date and extend mineralization to the southeast of prior drilling (see press release ‘Highlander Silver Reports First Drill Results from Bonita Open Pit Target, Including High Grades over Broad Widths from Near Surface in Every Hole’ – July 29, 2025)
BOD-013 was drilled from a step-out platform to the southeast of prior drilling and returned 24.8m of 7.43 grams per tonne (“g/t”) gold (“Au”) and 16.45 g/t silver (“Ag”) from 28.7m downhole
BOD-010 returned 40.4m of 3.42 g/t Au and 16.93 g/t Ag from surface to the southeast of prior drilling from a platform at the edge of soils that may cover the extent of the vein system to the west
BOD-014 was drilled from a step-out platform to the southeast of BOD-010 and returned 19.1m of 3.50 g/t Au and 11.57 g/t Ag from 37.7m downhole
BOD-015, the southeastern most hole drilled to date, returned 23.7m of 3.31 g/t Au and 9.60 g/t Ag from 34.3m downhole, with the zone remaining open in this direction
The next set of drill results are expected to be released when complete assays are received in approximately six weeks and will include step-out drilling from the eastern known extent of the structure targeted by the initial drilling
Bonita is located 10km to the south and 700m lower in elevation than Ayelen; the vein system encompasses a number of silicified structures exposed in several outcrops over an area of 800m by 200m and remains open in all directions
A magnetic survey undertaken with two quadcopter drones has completed approximately 5,000 hectares in the Bonita area, with the goal of mapping structural features under cover to the west and in rugged topography to the east
Figure 1 – Plan View of Bonita Vein System
Figure 2 – Image of Core from BOD-013 (31.05m to 35.05m)
Note: Silicified breccia typical of the Bonita vein system.
Table 1 – Assay Results
Hole ID
From (m)
To (m)
Interval (m)
Au (g/t)
Ag (g/t)
BOD-010
0.0
40.4
40.4
3.42
16.93
BOD-011
0.0
20.9
20.9
1.48
18.93
BOD-012
42.2
44.3
2.1
0.72
10.66
and
54.9
61.6
6.8
0.82
6.30
BOD-013
28.7
53.5
24.8
7.43
16.45
BOD-014
37.7
56.8
19.1
3.50
11.57
BOD-015
34.3
58.0
23.7
3.31
9.60
Note: Reported intervals are apparent widths as the full geometry of the mineralized structures has not yet been fully modelled. Assays were not capped, and composite intervals are calculated using a minimum weighted average of 0.5 g/t Au, diluted over a minimum core length that allows for internal dilution.
Table 2 – Collar Locations
Hole ID
Easting (m)
Northing (m)
Elevation (m)
Depth (m)
Azimuth (°)
Dip (°)
BOD-010
187988
8953712
3964
90.0
110
-90
BOD-011
187989
8953711
3964
51.0
20
-45
BOD-012
187941
8953730
3953
81.0
0
-90
BOD-013
188034
8953659
3967
60.0
7
-40
BOD-014
188034
8953659
3967
75.0
35
-45
BOD-015
188034
8953659
3967
69.8
52
-40
Technical Information and Quality Control / Quality Assurance
All drilling was completed with HQ core. The drill core is split in half using a diamond saw. Core is logged by the Company’s geologist on site who outlines the intervals to be sampled. The maximum sample length is 1.5 meters and lengths are adjusted according to lithological and/or mineralogical contacts.
After sawing, one-half of the core is kept on site in core boxes, and the other half is submitted for analysis. Individual sample bags are sealed and placed into larger bags, which are then sealed and marked with the contents.
Samples are transported by Highlander Silver personnel to ALS Peru S.A. (“ALS“) located in Lima, Peru, where they are prepared and analyzed. ALS is independent of the Company.
In ALS, the entire sample is crushed to approximately 80% passing through a 2mm sieve. A 500 g fraction is pulverized. Gold concentration is determined by fire assay of a 30-gram charge with an AA finish (Au-AA23). Silver, lead, copper, and zinc, along with other elements, are analyzed by ICP utilizing a four-acid digestion (ME-ICP61). Over-limit samples for Au (10 g/t Au) follow gravitational finishing Au-GRA21 (30g sample). Over-limit samples for Ag (100 g/t Ag) follow gravitational finishing Ag-GRA21 (30g sample).
The internal QA/QC program includes the submission of field duplicates (1/4 core), pulp and coarse reject duplicates, and the insertion of commercial standards and blanks (coarse and fine). Control samples account for more than 15% of the total samples sent, in addition to the laboratory’s internal quality assurance programs.
The Company is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.
The scientific and technical information, including the drillhole data, has been verified by Dr. Sergio Gelcich. This verification involves data validation and quality assurance procedures, such as reviewing logging directly in front of the core, analyzing database integrity, conducting quality assurance and quality control (QA/QC) for assays, and cross-checking the original lab certificates.
Qualified Person
The scientific and technical information in this press release has been reviewed and approved by Dr. Sergio Gelcich, P.Geo., Vice President, Exploration, Highlander Silver, who is a “Qualified Person” as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects.
Highlander Silver is primarily focused on advancing the bonanza grade San Luis gold-silver project that is located adjacent to the past-producing Pierina mine in Central Peru. San Luis hosts Indicated Mineral Resources of 356 koz Au at 24.4 g/t Au and 8.4 Moz Ag at 579 g/t Ag and ranks among the 10 highest grade projects globally in both gold and silver categories.1 The Company’s significant shareholders include the Augusta Group, which boasts an exceptional track record of value creation totaling over $4.5 billion in exit transactions, and strategic shareholders, the Lundin family and Eric Sprott.
1S&P Global rankings including the San Luis gold-silver project.
The mineral resource estimate disclosed herein is derived from Highlander Silver’s technical report titled “Technical Report on the San Luis Property” with an effective date of January 15, 2025, prepared by independent qualified person, Martin Mount, MSc MCSM FGS CGeol FIMMM Ceng, and available on SEDAR+ at www.sedarplus.ca.
Forward-looking statements
Certain information contained in this news release constitutes “forward-looking information” under Canadian securities legislation. This includes, but is not limited to, the next set of drill results are expected to be released when complete assays are received in approximately six weeks and will include step-out drilling from the eastern known extent of the structure targeted by the initial drilling. Such forward looking information or statements can be identified by the use of words such as “ramp up”, “attempting”, “intends”, “believes”, “plans”, “suggests”, “targets” or “prospects” or variations (including negative variations) of such words and phrases, or state that certain actions, events or results “will” be taken, occur, or be achieved. Forward-looking information involves known and unknown risks, uncertainties, and other factors which may cause the actual results, performance, or achievements of the Company and/or its subsidiaries to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking information. Such factors include, among others, general business, economic, competitive, political and social uncertainties, the actual results of current exploration activities, changes in project parameters as plans continue to be refined, future prices of precious and base metals, accident, labour disputes and other risks of the mining industry, and delays in obtaining governmental or stock exchange approvals or financing. Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may be other factors that could cause actions, events or results to differ from those anticipated, estimated or intended. Forward-looking information contained herein are made as of the date of this news release. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. The Company undertakes no obligation to update forward-looking information if circumstances or management’s estimates or opinions should change, except as required by applicable securities laws. Accordingly, the reader is cautioned not to place undue reliance on forward-looking information.
With one in four households planning to invest in property, Liberty has home loan solutions to empower more Australians to reach their goals.
MELBOURNE, AU / ACCESS Newswire / September 15, 2025 / According to the latest data from Agile Market Intelligence, 25% of households intend to invest in real estate in the next 12 months.
As a leader in the Australian mortgage space, Liberty is ready to support borrowers looking to start or grow their property portfolio with flexible investment home loans.
Communications Manager, Bernadine Pantarotto, says the non-bank lender is committed to helping more Australians take advantage of new opportunities.
“Whether you’re just starting out or expanding your property portfolio, Liberty offers solutions designed to help you say ‘yes’ to your property plans,” said Ms Pantarotto.
“Liberty has solutions for seasoned investors ready to expand with flexible loans designed to support long-term growth.”
For those looking to step into property, an investment home loan could be a smart option to help build equity and generate rental income.
Unlike traditional lenders, Liberty takes a free-thinking approach to offer more choice for customers who may not fit the standard mold.
This includes low doc and low deposit investment home loans which may be helpful for self-employed borrowers or those with alternative sources of income.
“We look holistically at each customer’s unique circumstances to help find a solution tailored to their needs,” said Ms Pantarotto.
The lender combines risk-based assessment with personalized customer service to provide greater choice.
“We understand no two borrowers are the same, so we’re proud to work with customers to help keep their property investment plans moving forward,” said Ms Pantarotto.
Liberty’s lending options can also support other life goals, from renovating a home, to launching a business or planning a well-earned getaway.
Beyond investment home loans, Liberty offers personal, car, commercial, business and SMSF loans.
“With close to 30 years of experience, our free-thinking solutions have helped over 900,000 borrowers reach their goals, and we’re ready to help more Australians with their lending needs,” said Ms Pantarotto.
About Liberty As one of Australia’s leading non-bank lenders, Liberty offers innovative solutions to support customers with greater choice. For nearly 30 years, this free-thinking approach to loan solutions has seen more than 900,000 customers across a wide range of home, car, business and personal loans, as well as SMSF lending and insurance. Liberty remains the only non-bank lender with an investment-grade credit rating offering custom and prime solutions to help more people get financial.
Approved applicants only. Lending criteria apply. Fees and charges are payable. Liberty Financial Pty Ltd ACN 077 248 983 and Secure Funding Pty Ltd ABN 25 081 982 872 Australian Credit Licence 388133, together trading as Liberty Financial.
RestoPros of New Orleans celebrates a significant business anniversary this year, marking another milestone in providing professional restoration services to residential and commercial clients throughout the Greater New Orleans area. The company continues to offer round-the-clock emergency response for water, fire, mold, and storm damage restoration needs.
The anniversary comes as the restoration industry faces increasing demand for rapid response services, particularly in coastal regions vulnerable to severe weather events. The company maintains its 24/7 availability for emergency situations, adhering to Institute of Inspection, Cleaning and Restoration Certification (IICRC) guidelines while serving communities including Arabi, Gretna, Kenner, Metairie, and New Orleans.
“Reaching this anniversary milestone reflects our team’s dedication to serving the New Orleans community during their most challenging times,” said Philip Ehrhardt, Operations Director at RestoPros of New Orleans. “Every emergency call represents a family or business facing significant disruption, and our commitment remains focused on providing swift, professional restoration services that help people return to normalcy as quickly as possible.”
Water Damage Repair continues to represent a substantial portion of the company’s emergency response calls, with incidents ranging from pipe bursts to appliance failures affecting both residential homes and commercial properties. The restoration team employs specialized equipment and techniques to extract water, dry affected areas, and prevent secondary damage such as mold growth.
The company’s comprehensive service portfolio addresses the full spectrum of property damage scenarios. Fire and smoke damage restoration requires immediate attention to prevent permanent damage to structures and belongings, while mold remediation demands careful containment and removal procedures to ensure safe indoor air quality. Storm damage restoration often combines multiple service areas, as severe weather can cause water intrusion, structural damage, and power outages that create complex restoration challenges.
Throughout its years of operation, the company has maintained insurance coverage and bonding requirements necessary for working in sensitive residential and commercial environments. The restoration team combines three decades of collective industry experience, enabling them to handle projects ranging from single-room water damage to complete commercial property restoration following major disasters.
“Our anniversary serves as a reminder of the trust our community places in restoration professionals,” added Ehrhardt. “We recognize that property damage creates tremendous stress for property owners, and our role extends beyond technical restoration work to providing reassurance and clear communication throughout the recovery process.”
The company offers free inspections and detailed quotes for all restoration services, allowing property owners to understand the scope of necessary work before restoration begins. This transparent approach helps clients work effectively with insurance companies and make informed decisions about their property restoration needs.
RestoPros of New Orleans specializes in water damage restoration, fire and smoke damage restoration, mold remediation, and storm damage restoration for residential and commercial properties. The company operates 24 hours a day, seven days a week, providing emergency response services throughout the Greater New Orleans metropolitan area.
###
For more information about RestoPros of New Orleans, contact the company here:
RestoPros of New Orleans Philip Ehrhardt (504) 222-1551 info@restoprosnola.com 525 Jefferson Highway Suite 804, New Orleans LA 70121
Appleton, Wisconsin – September 15, 2025 – (PRESS ADVANTAGE) –
McCormick Industries, a leader in precision CNC swiss machining within the manufacturing sector, today highlights its nearly three decades of expertise in computer numerical control (CNC) machining. As a company that has grown alongside technological advancements, McCormick Industries emphasizes its commitment to delivering high-quality, accurately engineered components for various industries, including aerospace, electronics, and medical devices. The company’s dedication to precision reflects its ongoing pursuit of excellence in manufacturing practices.
The evolution of precision machining encompasses the integration of advanced computer-aided design (CAD) and manufacturing (CAM) software, which are pivotal in transforming intricate designs into tangible products. Through this technology, McCormick Industries achieves demanding tolerances and creates complex parts with impressive repeatability and accuracy. The company’s investments in cutting-edge machinery enable it to stay competitive in an industry that thrives on precision and detail.
Precision CNC machining by McCormick Industries sets a high standard for parts manufacturing, ensuring that each component meets rigorous specifications. Automated CNC tools, capable of performing multiple operations in a single setup, enhance efficiency while minimizing human error during part production. This streamlined approach not only boosts productivity but also allows for superior quality control, making it ideal for industries where precision is critical.
“At McCormick Industries, we pride ourselves on our rich history and commitment to advancing CNC technology,” said Gary Hermsen, CEO of McCormick Industries. “The integration of innovative machining processes has positioned us as a trusted partner in delivering components that consistently meet the high standards of our clients.”
The company specializes in multi-axis machining, which enables simultaneous operations across various dimensions and configurations. This capability is essential for producing complex geometries that are commonly found in sophisticated applications such as medical devices and aerospace components. The benefits of multi-axis machining include enhanced production rates and superior dimensional accuracy, significantly impacting the overall quality of manufactured products.
McCormick Industries‘ Swiss machining capabilities further extend their precision manufacturing portfolio, particularly excelling in the production of high-precision, small-diameter components with exceptional length-to-diameter ratios. The Swiss-type lathes utilize advanced sliding headstock technology and guide bushing support systems, enabling the fabrication of intricate parts with tolerances as tight as ±0.0002 inches. This specialized machining approach is particularly advantageous for producing medical implants, electronic connectors, and precision instrumentation components where consistent accuracy and superior surface finishes are paramount to application success.
With the ability to work with a wide range of materials—including aluminum, stainless steel, and exotic alloys—McCormick Industries caters to diverse project requirements. From custom prototypes to high-volume production runs, the company’s versatility in material usage allows it to adapt to client needs effectively. The expertise within the team ensures that each project is approached with tailored precision machining techniques for optimal results.
“Over the years, our goal has been to continually refine our processes and expand our capabilities to better serve our customers,” said Hermsen. “We focus on fostering partnerships that go beyond transactions, striving to become an essential part of our clients’ success stories.”
McCormick Industries also leverages Swiss precision machining methods, which allow for enhanced accuracy during the creation of intricate components. This technique proves indispensable in sectors that demand high tolerances, such as robotics and surgical tools, where every minute detail can have significant implications on functionality and safety.
The company’s commitment to quality and precision propels its ongoing success and strengthens relationships with clients across various industries. By maintaining a clear focus on technological advancements, McCormick Industries continuously elevates its manufacturing processes. This dedication positions the company as a leader in a competitive market, ensuring sustained growth and innovation.
As McCormick Industries reflects on its nearly 30 years of achievement, the company remains poised to tackle future industry challenges and opportunities. With a skilled workforce and advanced technology at its disposal, McCormick Industries is dedicated to shaping the landscape of precision machining. The ability to meet stringent project requirements promises to leave a lasting impact on clients seeking reliable, high-quality manufacturing solutions.
###
For more information about McCormick Industries, contact the company here:
McCormick Industries Gary Hermsen 920-954-9648 info@mccormickind.com 1103 South Perkins Street Appleton, WI 54914
